Make-A-Berm™ Heavy Duty allows for spill containment to be installed around difficult to move equipment, spill-prone areas, or areas where a standard-shaped berm wont’ work. Heavy Duty vented Corner pieces are key to providing a full spill containment. These allow air to flow thru as forklift traffic and hand truck equipment are being used. Non-absorbent Orange modified PVC coated fabric provides a highly resistant barrier to contain oils, gasoline, acids and other liquids.
Product Summary:
- Heavy Duty berms use heavier duty PVC coated material along with aluminum strips to withstand vehicle traffic.
- Vented corners allow for air to release when berm is rolled on so that the berm is not damaged.
- Corner pieces can be combined with straight pieces to create a complete containment solution.
- Contains spills and leaks around unique equipment situations.
- Hi-visible orange color for use in high traffic areas.
- 1.5” and 2” are ideal for small to medium capacity containment needs.
- Semi- permanent, can easily be installed and removed.
- Helps to comply with EPA for containment and spill prevention (SPCC) regulations.
Specifications
| Model No | 28494 |
|---|---|
| UPC | 697841270411 |
| Color | Orange |
| Material Specifications | PVC Coated Fabric |
| EPA Compliance | Helps comply with EPA for containment and spill prevention (SPCC) |
| SPCC Compliance | 40 CFR 112.7 (c) |
| Dimensions, Exterior | 1.5" H x 5.5" W x 11" L |
| 38.1mm H x 139.7mm W x 279.4mm L | |
| Includes | 2 ea. 1.5" H vented corners, Aluminum strips with screws |
| Berm Shape | Halfmoon |
| Foam Material | Open Cell Urethane |
| Temperature range of the material | -40degreesF- 180 degrees F |
| Vehicle Traffic | Vehicle Traffic, Fork lifts, Wheeled carts, Hand carts |
Documentation:
Make-A-Berm Product Sheet (366.01 KB)
